Witam.
Ostatnio słyszałem o bardzo fajnym bajerze jak WOL. Stwierdziłem że kupie ładną kartę sieciową i zrobie użytek z mojego starego sprzętu. Niestety mam problem z konfiguracją. Postępowałem zgodnie z opisami:
http://rpc.one.pl/index.php/lista-artykulow/34-openwrt/84-wake-on-lan-or-wan-w-openwrt
http://dimmeria.com/?q=node/1755
ale po wpisaniu komendy ethtool -s eth2 wol g stan karty się nie zmienia
tz dalej jest:
Settings for eth2:
Supported ports: [ TP MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Advertised auto-negotiation: Yes
Speed: 100Mb/s
Duplex: Full
Port: MII
PHYAD: 32
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: pumbg
Wake-on: d
Current message level: 0x00000007 (7)
Link detected: yes
Gdy wpisze ethtool -s eth2 wol pumbg zmienia się na:
Settings for eth2:
Supported ports: [ TP MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Advertised auto-negotiation: Yes
Speed: 100Mb/s
Duplex: Full
Port: MII
PHYAD: 32
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: pumbg
Wake-on: umb
Current message level: 0x00000007 (7)
Link detected: yes
Nie mam pojęcia czym jest to spowodowane i dlaczego nie działa :( Szczerze to już mnie to trochę zmęczyło :(
W biosie ustawiłem:
Power On By Lan & Ring On Power On
Pozostała konfiguracja jak w opisie (choć aktualnie plik /etc/init.d/halt ma trochę inną zawartość :) ) i nie mam pojęcia co robić
Mój sprzęt to:
*Płyta główna: K7S5A
Server-PC:/home/sebastian# dmidecode
# dmidecode 2.9
SMBIOS 2.3 present.
23 structures occupying 1649 bytes.
Table at 0x000F0630.
Handle 0x0000, DMI type 0, 20 bytes
BIOS Information
Vendor: American Megatrends Inc.
Version: 07.00T
Release Date: 04/02/01
Address: 0xF0000
Runtime Size: 64 kB
ROM Size: 256 kB
Characteristics:
ISA is supported
PCI is supported
PNP is supported
APM is supported
BIOS is upgradeable
BIOS shadowing is allowed
ESCD support is available
Boot from CD is supported
Selectable boot is supported
BIOS ROM is socketed
EDD is supported
5.25"/360 KB floppy services are supported (int 13h)
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 KB floppy services are supported (int 13h)
3.5"/2.88 MB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Printer services are supported (int 17h)
CGA/mono video services are supported (int 10h)
ACPI is supported
USB legacy is supported
AGP is supported
LS-120 boot is supported
ATAPI Zip drive boot is supported
BIOS boot specification is supported
Handle 0x0001, DMI type 1, 25 bytes
System Information
Manufacturer: ECS
Product Name: K7S5A
Version: 1.0
Serial Number: 00000000
UUID: Not Settable
Wake-up Type: Modem Ring
Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
Manufacturer: ECS
Product Name: K7S5A
Version: 1.0
Serial Number: 00000000
Handle 0x0003, DMI type 3, 17 bytes
Chassis Information
Manufacturer: ECS
Type: Desktop
Lock: Not Present
Version: Version 1.00
Serial Number: 123456890
Asset Tag: 0123ABC
Boot-up State: Unknown
Power Supply State: Unknown
Thermal State: Unknown
Security Status: Unknown
OEM Information: 0x00000000
Handle 0x0004, DMI type 4, 32 bytes
Processor Information
Socket Designation: Socket-A
Type: Central Processor
Family: Other
Manufacturer: AMD
ID: 71 06 00 00 55 00 00 00
Version:
Voltage: 3.3 V 2.9 V
External Clock: 66 MHz
Max Speed: 1200 MHz
Current Speed: 1200 MHz
Status: Populated, Enabled
Upgrade: LIF Socket
L1 Cache Handle: 0x0005
L2 Cache Handle: 0x0006
L3 Cache Handle: Not Provided
Handle 0x0005, DMI type 7, 19 bytes
Cache Information
Socket Designation: Internal Cache
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 128 KB
Maximum Size: 1024 KB
Supported SRAM Types:
Synchronous
Installed SRAM Type: Synchronous
Speed: Unknown
Error Correction Type: None
System Type: Unified
Associativity: 4-way Set-associative
Handle 0x0006, DMI type 7, 19 bytes
Cache Information
Socket Designation: Internal Cache
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Write Back
Location: Internal
Installed Size: 64 KB
Maximum Size: 1024 KB
Supported SRAM Types:
Synchronous
Installed SRAM Type: Synchronous
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: 4-way Set-associative
Handle 0x0007, DMI type 5, 24 bytes
Memory Controller Information
Error Detecting Method: 32-bit ECC
Error Correcting Capabilities:
Single-bit Error Correcting
Supported Interleave: One-way Interleave
Current Interleave: One-way Interleave
Maximum Memory Module Size: 128 MB
Maximum Total Memory Size: 512 MB
Supported Speeds:
70 ns
60 ns
Supported Memory Types:
Standard
FPM
EDO
Parity
ECC
SIMM
Memory Module Voltage: 3.3 V
Associated Memory Slots: 4
0x0008
0x0009
0x000A
0x000B
Enabled Error Correcting Capabilities:
Single-bit Error Correcting
Handle 0x0008, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: ROW-0
Bank Connections: 4 11
Current Speed: Unknown
Type: DIMM SDRAM
Installed Size: 256 MB (Single-bank Connection)
Enabled Size: 256 MB (Single-bank Connection)
Error Status: OK
Handle 0x0009, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: ROW-1
Bank Connections: 4 11
Current Speed: Unknown
Type: DIMM SDRAM
Installed Size: 256 MB (Single-bank Connection)
Enabled Size: 256 MB (Single-bank Connection)
Error Status: OK
Handle 0x000A, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: ROW-2
Bank Connections: 0 0
Current Speed: Unknown
Type: Unknown
Installed Size: Not Installed
Enabled Size: Not Installed
Error Status: OK
Handle 0x000B, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: ROW-3
Bank Connections: 0 0
Current Speed: Unknown
Type: Unknown
Installed Size: Not Installed
Enabled Size: Not Installed
Error Status: OK
Handle 0x000C, DMI type 9, 13 bytes
System Slot Information
Designation: PCI1
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 1
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Handle 0x000D, DMI type 9, 13 bytes
System Slot Information
Designation: PCI2
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 2
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Handle 0x000E, DMI type 9, 13 bytes
System Slot Information
Designation: PCI3
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 3
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Handle 0x000F, DMI type 9, 13 bytes
System Slot Information
Designation: PCI4
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 4
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Handle 0x0010, DMI type 9, 13 bytes
System Slot Information
Designation: PCI5
Type: 32-bit PCI
Current Usage: In Use
Length: Long
ID: 5
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Handle 0x0011, DMI type 11, 5 bytes
OEM Strings
String 1: SMBIOS Support from AMI
String 2: Tested by James
Handle 0x0012, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB
Internal Connector Type: Mini Centronics
External Reference Designator: Def
External Connector Type: DB-25 male
Port Type: SSA SCSI
Handle 0x0013, DMI type 12, 5 bytes
System Configuration Options
Option 1: System Management BIOS from Atlanta
Option 2: SMBIOS from AMI
Handle 0x0014, DMI type 13, 22 bytes
BIOS Language Information
Installable Languages: 4
English
Traditional Chinese
Simplified Chinese
Japanese
Currently Installed Language: Not Specified
Handle 0x0015, DMI type 64, 11 bytes
Unknown Type
Header and Data:
40 0B 15 00 00 07 95 FA FD E6 86
Handle 0x0016, DMI type 127, 4 bytes
End Of Table
*Karta sieciowa: PLANET (ENW-9503A) Karta sieciowa PCI 10/100Mbps Wake On LAN, gniazdo na BootROM
Specyfikacja
Kod Producenta: ENW-9503A
Interfejs: PCI
Rodzaj: Przewodowa
Standard przewodowy: 10/100 (Mbps) - 802.3u Fast Ethernet
Standard bezprzewodowy: Nie dotyczy
Chipset: Realtec RTL8139
Zgodność ze standardem: IEEE 802.3 10 Base-T Ethernet, IEEE 802.3u 100 Base-TX Fast Ethernet
Ilość wyjść: 1 szt.
Kompatybilność: Sterowniki pod: ODI Driver dla NetWare 3.x, 4.x, 5.x, NDIS Driver dla LAN Manager, Microsoft Windows 95/98/ME/NT/2000/ XP. Windows for Workgroup, Packet Driver for TCP/IP, LANtastic, Linux, SCO Unix 4.x, 5.x
Wymiary (wys x szer): 122 x 121 mm
Informacje dodatkowe: Gniazdo na Boot ROM, Wake On LAN
Opis: Możliwość instalacji BootROM na kartach BR-9503 oraz BR-9503-PXE dla Windows. Interfejs zgodny ze specyfikacją PCI 2.2 Wysokowydajna architektura „bus master” z obsługą DMA. Współpracują z systemem zarządzania energią ACPI.
www: http://planet.pl/produkty/karty_sieciowe/wg_interfejsu/pci/przewodowe/enw_9503a www
(połączony z płytą główną specjalnym - 3 żyłowym kablem - nie, nie domowej roboty ;P)
*Router: Linksys WRT54GC
(ustawiłem STATIC DHCP dla komputera, oczywiście podłączony kablem ;P Komputer wysyłający magiczny pakiet łączy się za pomocą interfejsu wlan)
Nie mam pojęcia co z tym robić :/